ISOKOR Plastic and METAL

  • ISOKOR PLASTIC & METAL PROFI

    Uses: Extremely efficient and durable protective nanotechnology coating for the treatment of plastics, painted surfaces, stainless steel and chrome. ISOKOR PLASTIC & METAL PROFI is ideal for all car finishes including clearcoat, the initial treatment of stainless steel, chrome, painted boats hulls, personal watercrafts and parts below the waterline, painted metal, painted and unpainted plastic and other hard surfaces painted for example varnished wood. It is ideal for initial treatment of plastics as plastic tubs, plastic and stainless sinks, plastic window frames, stainless steel cookware, oven, faucets, painted surfaces such as painted furniture, furniture covered with plastic film. (Some spirit based and lower quality paints can soften. Prior to application, it is necessary to test ISOKOR on small test area.)

    Invisible, but solid protective layer is formed on the treated surface, and protects material against water, oil, de-icing salt, dirt, mussels, barnacles and algae.
    Contaminants and other impurities are unable to attach to the surface and can be easily removed without strong chemicals or abrasive agents. Generally, they can be washed off with clean water. Permanent, lifetime treatment is accomplished with regular polishing of the treated surface with ISOKOR PLASTIC & METAL REVIVER (about every 3 to 6 months depending on your location).

    How you can permanently protect surface with ISOKOR PLASTIC & METAL PROFI and ISOKOR PLASTIC & METAL REVIVER?

    ♦ First step: Clean and polish the surface. Remove swirl marks or other imperfections from the paint. Apply ISOKOR PLAST & METAL PROFI on the surface with applicator or paper towel. On midsize car, you can do it in 15 minutes. Yes, it is very easy to apply. Polish to high gloss with microfiber towel.
    ♦ Second step: Apply coat of ISOKOR PLASTIC & METAL REVIVER. No sooner than 24 hours after the first step, and no later than one month after the first step. This way you will create a unique and superb effective layer on the surface.
    ♦ When you maintain surface regularly, you will use just a few drops of ISOKOR REVIVER. Only so much that you will not be polishing the surface "dry”. This way you are creating even better layer of protection.
    ♦ Every time you use ISOKOR REVIVER the surface will be constantly improving and gaining “diamond look”. Cleaning and maintenance intervals will be extended. This way cars, boats, stainless sinks etc. will look like new all the time. Maintenance of any material with ISOKOR REVIVER is as fun game with total cleanliness.

    FREE SHIPPING ON ALL ORDERS.
  • Please remember we ship only within the United States (excluding Alaska and Hawaii). We do not accept international orders.
  • Color Finish: Transparent
    Volume Isokor P&M Profi Coverage
    4 Oz Isokor 005 2 large sedans
    1 Quart Isokor 005 20 + large sedans

    Please Select Volume

     

     




    Properties of the treated surface:
    -strong repellent effect against water and oil
    -safe for all vehicle finishes including clearcoat
    -significant reduction in adhesion of dirt and lime scale
    -protects against salt, acid rain, undesirable impurities from seawater
    -high self-cleaning ability of surface from contaminants - the “lotus effect”
    -complete ecological (treated surface may come into contact with food)
    -invisible to human eye, the layer refines the surface and protects it from harsh environments
    -resistant to UV radiation and abrasion
    - resistant to temperature changes (can withstand continuous temperatures up to 445°F)
    -high chemical resistance (up to pH = 13)
    - duration of treatment about eight years. If combined with regular maintenance with ISOKOR PLASTIC - METAL Reviver the treatment is permanent. (Life can reduce due to mechanical damage or abrasive cleaners.)

  • Application:
    Shake before use for about 5 seconds. The surface must be clean before application, dry and degreased. After washing, rinse the surface with water and dry. For excellent cleaning and degreasing, we recommend to use ISOKOR CLEANER. Spray the surface at 41-86°F and with cotton or paper towel immediately gently polish.  Apply in small areas. Industrial application can be done by spraying. Correct technique for industrial application can be provided by the manufacturer ISOKORUSA LLC. During application, surface and product should not come into contact with water or moisture. The active substance in the product on the treated surface is chemically bonded - the reaction is complete after 24 hours. The active substance in the product will chemically bond to the treated surface - the reaction is complete after 24 hours. During this time, we recommend not to expose the treated surface to mechanical or chemical agents.

    Storage: 24 months from date of production in unopened original containers at 41-95°F. Do not expose to direct sunlight and frost.  After opening store in well-sealed containers for up to 6 months.

    Coverage: 3.5oz /100 to 200 sq ft

    Ingredients: isopropanol, modified hybrid materials, additives.

    Safety precautions:
    When working with the product, observe the usual precautions as when working with chemicals. Contains highly flammable substances. Do not use near an open flame during application. Keep container tightly closed away from sources of ignition.
    No smoking. Provide adequate ventilation. Irritating to eyes. Vapors may cause drowsiness and dizziness. Avoid contact with skin and eyes. In case of contact with skin, wash the affected area with plenty of water. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.  If swallowed, do not induce vomiting, but drink plenty of water and seek medical advice immediately. Keep out of the reach of children. Transfer and storage is allowed only in disposable containers of HDPE or glass. Recycle only empty containers. The product is intended for direct use. It is prohibited to dilute or mix product with other substances.

    ISOKOR plastic and metal REVIVER

    With regular use of ISOKOR PLASTIC & METAL REVIVER we guarantee permanent effect of ISOKOR PLASTIC & METAL PROFI.
    ISOKOR PLASTIC & METAL REVIVER activates, regenerates and refines the treated surface.
    FREE SHIPPING ON ALL ORDERS.
  • Please remember we ship only within the United States (excluding Alaska and Hawaii). We do not accept international orders.
  • Color Finish: Transparent
    Volume Isokor P&M Reviver Coverage
    4 Oz Isokor 006 2 large sedans
    1 Quart Isokor 006 20 + large sedans

    Please Select Volume

     

     

     

    Application:
    Shake before use for about 5 seconds. The surface must be clean and dry. To best clean the surface we recommend using ISOKOR CLEANER. Apply reasonable amount of ISOKOR PLASTIC & METAL REVIVER on the surface to be treated. Immediately, but gently polish with cotton or paper towel until the surface is dry. Apply at temperatures between 5 and 30 °C. We recommend not exposing the treated surface during 24 hours to any mechanical or chemical agents. After 24 hours, the surface with retain properties as when it was treated with ISOKOR PLASTIC & METAL PROFI.

    Storage: 24 months from date of production in unopened original containers at 41-95°F. Do not expose to direct sunlight and frost.  After opening store in well-sealed containers for up to 6 months.

    Coverage: 3.5oz /160 to 200 sq ft

    Ingredients: isopropanol, modified hybrid materials, additives.

    Safety precautions:
    When working with the product, observe the usual precautions as when working with chemicals. Contains highly flammable substances. Do not use near an open flame during application. Keep container tightly closed away from sources of ignition. No smoking. Provide adequate ventilation. Irritating to eyes. Vapors may cause drowsiness and dizziness. Avoid contact with skin and eyes. In case of contact with skin, wash the affected area with plenty of water. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.  If swallowed, do not induce vomiting, but drink plenty of water and seek medical advice immediately. Keep out of the reach of children. Transfer and storage is allowed only in disposable containers of HDPE or glass. Recycle only empty containers. The product is intended for direct use. It is prohibited to dilute or mix product with other substances.

    Back to Products